GN 565
Prijemalni ročaji omarice
Aluminij
Aluminij
Aluminij
Aluminij
- s prevleko iz umetne mase, mat strukturirano
- Black, RAL 9005, UV-resistant SW
- Red, RAL 3000 RS
- Silver, RAL 9006 SR
- Powder coated, antimicrobial finish
- Black, RAL 9005 SMA
- White, RAL 9016 WSA
- eloksirano, naravne barve EL
- svetlo, drsno polirano BL
Cabinet U-handles GN 565 are manufactured from a bent aluminum profile and have excellent stability and ergonomic design.
In addition to the standard surfaces, these cabinet U-handles are also available with a functional coating.
The SW version is coated with a highly weather-resistant and UV- resistant powder coating system, making this version excellent for outdoor use.
The SMA / WSA versions have a powder coating based on silver ions, which gives them antimicrobial properties. The principle of action has been shown to reduce the contamination of the handle surfaces within 24 hours so that fewer than 1% of bacteria and fewer than 5% of viruses ultimately survive.
Standard parts with antimicrobial powder coating are primarily used in the health care sector and in public buildings, such as airports, train stations, stadiums, etc.
- GN 181 Montažni kompleti (montaža s strani za upravljanje)
Ročaji in upravljalni elementi so lahko prenašalci številnih patogenov. Z vsakim stikom rok se bakterije in mikrobi oprimejo površine, kjer se lahko nekontrolirano razmnožujejo, npr. med dvema cikloma čiščenja. Če se pozneje površine z rokami dotakne ena ali več oseb, se razmnoženi patogeni prenašajo naprej.
The antimicrobial standard parts of the Sanline product family can prevent pathogens from propagating on an operating element. This actively reduces the spread of bacteria, fungi, and viruses.
Additives based on silver ions that are used in the plastics or powder coatings of standard parts of the Sanline product family destroy the cell walls of the microorganisms, killing them in the process. The effectiveness is retained for a long time, even after frequent cleaning cycles, and is absolutely safe for the user.
With their antimicrobial properties, the Sanline operating elements are predestined for areas with elevated hygiene requirements. To so na primer klinike, zdravniške ordinacije, rehabilitacijske in negovalne ustanove, pa tudi menze, živilskopredelovalna podjetja in živinorejske kmetije. Izdelki Sanline zmanjšujejo tveganje okužb tudi na mestih, kjer veliko ljudi prihaja v stik z ročaji in upravljalnimi elementi – na stadionih in v koncertnih dvoranah, v parkih za prosti čas in wellness centrih ter na javnih prevoznih sredstvih.
Functioning principle
Functioning principle
Plastics or powder coatings manufactured with silver ions inhibit the establishment and proliferation of pathogens on the surface. Učinek temelji na naravnem načelu in deluje neprekinjeno dolgo časa.
Silver ions (Ag⁺) diffuse from the surface and attach to the cell walls of the microbe. Po kratkem času srebrovi ioni prebijejo celično steno mikroba in motijo delovanje encimov v celici. Genetski material mikroba se napade tako, da se prepreči nadaljnja delitev celic, mikrob pa se dokončno uniči.
The antimicrobial effect of the additive is not reduced by repeated cleaning with soap or solvent. Even at sterilization temperatures the effect is not lost.
Plastics or powder coatings manufactured with silver ions inhibit the establishment and proliferation of pathogens on the surface. Učinek temelji na naravnem načelu in deluje neprekinjeno dolgo časa.
Silver ions (Ag⁺) diffuse from the surface and attach to the cell walls of the microbe. Po kratkem času srebrovi ioni prebijejo celično steno mikroba in motijo delovanje encimov v celici. Genetski material mikroba se napade tako, da se prepreči nadaljnja delitev celic, mikrob pa se dokončno uniči.
The antimicrobial effect of the additive is not reduced by repeated cleaning with soap or solvent. Even at sterilization temperatures the effect is not lost.
The plastics or powder coatings of the Sanline standard parts were tested by an accredited testing laboratory on the following microorganisms:
| Plastic | Powder coating |
| Bacteria (as per ISO 22196:2011): | Bacteria (as per ISO 22196:2011): |
| Staphylococcus aureus ATCC® 25923™ | Escherichia coli ATCC® 25922™ |
| Escherichia coli ATCC® 25922™ | Pseudomonas aeruginosa ATCC® 27853™ |
| Klebsiella pneumoniae ATCC® 13883™ | Enterococcus hirae ATCC® 10541 |
| Pseudomonas aeruginosa ATCC® 27853™ | - |
| - | Viruses (as per ISO 21702:2019): |
| Fungi (as per ISO 22196:2011): | Influenza A (H1N1) |
| Candida albicans ATCC® 10231™ | Human coronavirus (OC43) |
| - | SARS-CoV-2 |
The principle of action has been shown to reduce the growth of bacteria and fungi within 24 hours so that the surfaces ultimately exhibit less than 1% of the original microbial contamination. In the case of viruses, the contamination is reduced to below 5%.
Typical standard part
Razmnoževanje mikroorganizmov v 24 urah
Vaše povpraševanje je bilo poslano in bo obdelano takoj, ko bo mogoče.