HCY-E-ST

Električni kazalniki ravni olja

Material

Prozoren tehnopolimer na osnovi poliamida (PA-T). Zelo odporen na udarce, topila, olja z aditivi, alifatske in aromatske ogljikovodike, bencin, nafto, fosforne estre.

Izogibajte se stiku z alkoholom ali detergenti, ki vsebujejo alkohol.

Vijaki

Nickel-plated brass with hexagon socket.

Tesnilni obroči

O-obroč iz sintetične gume NBR.

Plovec

Polyamide based (PA) technopolymer in red colour, with a built-in magnetic element to activate the electric contact when the oil level drops to the minimum set at 40mm over the screw axis (dimension l).

MIN level electrical sensor

It generates an electric signal when the oil level reaches the minimum level.

The inside of the cavity where the sensor is contained is completely resinated in order to increase the thermal and electric insulation.

Priključitev

Right side output including protection against water sprays (protection class IP 65 according to EN 60529).

MAX temperature electrical sensor (80°C)

It is set at a standard intervention temperature of 80°C, placed close to a metallic plate which serves as a conductor of the heat of the fluid for a faster transmission and a lower dissipation. The inside of the cavity where the sensor is contained is completely resinated in order to increase the thermal and electric insulation.

Za pravilno montažo glejte Opozorila.

Kontrastni prikaz

Bel lakiran aluminij. Ohišje v ustrezni zunanji zadnji reži zagotavlja najboljšo zaščito pred neposrednim stikom s tekočino.

It can be taken out before assembly to allow the insertion of level lines or words.

Screw-covers

Polyamide based technopolymer, grey colour.

Standardne izvedbe

• HCY-E-ST-NO: z odprtim elektronskim kontaktom. Ta se zapre, ko je dosežena minimalna raven olja.
• HCY-E-ST-NC: z zaprtim elektronskim kontaktom. Ta se odpre, ko je dosežena minimalna raven olja.

Najvišja neprekinjena obratovalna temperatura

80°C (with oil).