FHB
FHB
Magnetic stand
for flexible coolant hoses, technopolymer
for flexible coolant hoses, technopolymer

78711-R,20
78710-R,10
78712-R,50
ozGN 300-30-B5-SW;60
GN 612-5-M12x1,5-A;40
DIN 172-B10,5-20-A;50
ISO 8675-M8x1-04-BT;10
78711-R,20
78710-R,10
78712-R,50
ozGN 300-30-B5-SW;60
GN 612-5-M12x1,5-A;40
DIN 172-B10,5-20-A;50
ISO 8675-M8x1-04-BT;10
Umetna masa termoplast (poliamid PA), črna
Ferrite retaining magnet
Polypropylene based (PP) technopolymer, black colour.
The stand allows you to use up to two 1/4" segments simultaneously; the magnet integrated in the structure allows the system to be anchored in multiple positions, also facilitating repeated movements.
Fluid can enter the system via the barbed fitting to be coupled with an external tube, for a better seal, the use of tightening bands is recommended.
The magnetic stand can also be used with 1/2" systems by means of a threaded adapter which can be purchased.
.
Material resistant to detergents, lubricants and oils, avoid contact with strong acids and bases.
To use fluids other than those listed, contact Elesa+Ganter’s technical department.
V vsakem primeru priporočamo, da preverite ustreznost izdelka za dejanske delovne pogoje
Vaše povpraševanje je bilo poslano in bo obdelano takoj, ko bo mogoče.