Izvedba
- Type C3: Polished, rubber vulcanized, black
- Type C4: Polished, rubber vulcanized, white
- Type C7: Polished, rubber vulcanized, blue
Versions of threaded stud
- S: brez matice, zunanji šestrobni navoj spodaj
- SK: z matico, zunanji šestrobni navoj spodaj
- T: brez matice, nastavek za ključ spodaj
- TK: z matico, nastavek za ključ spodaj
Plemenito jeklo 1.4404 (A4)
Plemenito jeklo 1.4404 (A4)
- Akrilnitril-butadien-kavčuk (NBR)
Informacije
Leveling feet GN 18 are particularly suitable for use in aggressive environments.
The inclined surfaces for liquid runoff and the high surface quality of the base plate simplify cleaning and prevent the accumulation of dust or dirt. The FDA compliant and vulcanized rubber underlay seals the base against the resting surface and allows the feet to be used in food-processing areas or the pharmaceutical industry, for example.
Zgibne noge so dobavljene v montiranem stanju in jih ni mogoče demontirati.
Nosilnost izravnalnih nog
| d1 | d2 | Static load Fs in kN |
| - | - | Versions of threaded studs |
| - | - | S / SK | T / TK |
| 60 | M 8 | 8 | - |
| 60 | M 10 | 8 | - |
| 60 | M 12 | 14 | - |
| 60 | M 16 | - | 14 |
| 80 | M 8 | 8 | - |
| 80 | M 10 | 8 | - |
| 80 | M 12 | 14 | - |
| 80 | M 16 | - | 14 |
| 80 | M 20 | - | 32 |
| 80 | M 24 | - | 36 |
| 100 | M 8 | 8 | - |
| 100 | M 10 | 8 | - |
| 100 | M 12 | 16 | - |
| 100 | M 16 | - | 24 |
| 100 | M 20 | - | 26 |
| 100 | M 24 | - | 28 |
| 120 | M 20 | - | 26 |
| 120 | M 24 | - | 26 |
| 120 | M 30 | - | 26 |
The static load bearing capacity given in the table rests on a test series in which the load has been applied perpendicular to the base plate. For the values given in the table, the strain relief may result in minor deformations of the base plate.
Bending and buckling stress which often occurs in practice results in a lower load bearing capacity of the adjustment spindle and may have to be taken into account.
Also, the spindle strength is assumed to be ≥ 500 N/mm2).
The details given on strength are non binding guide values without any liability. In general, they do not constitute a warranty of quality.
Ali je izdelek primeren za določeno uporabo, mora v posameznem primeru določiti uporabnik. Na navedene vrednosti lahko vplivajo vplivi okolja.
Versions of threaded stud
| Versions of threaded stud |
| External hex at the bottom | Wrench flat at the bottom |
 |  |
| S: brez matice | T: brez matice |
| SK: z matico | TK: z matico |
| (M 8...M 12) | (M 16...M 24) |
