GN 918.2-KVS Vpenjalni zapahi Screw from the Operator‘s Side

Clamping bolts GN 918.2 have a circumferential wedge surface. They allow for rapid and secure clamping and releasing with a relatively large clamping range and with high clamping force. Owing to the small pitch angle (wedge angle), the clamping bolt is self-locking. The ball levers of types KV / KVS / KVB and GV / GVS / GVB form a positive connection with the clamping bolt by means of a serration. During assembly, the lever can thus be fixed in a position favorable for clamping or, in the relaxed position, rotated out of the clamping range.

Version with Threaded Bolt

Use of the thrust washer eliminates the need for special requirements on the design of the threaded hole, which allows, for example, fastening to tables with T-slots.

Version with Screw from the Operator‘s Side

Fastening via screw from the operator‘s side bridges a greater clamping range. A sufficiently large screw-in depth t is necessary to safely absorb the screw forces.

Version with Screw from the Back

Fastening with a bushing allows the part to be used even if there is no thread in the surrounding structure. The heavy duty washer directs the resulting screw forces into the surrounding structure.

• Technical instructions 

• Vrednosti trdnosti vijakov 

• Lastnosti umetne mase