Specification
Types
- Type AP: Forked clamping arm, with two flanged washers
- Type CP: Forked clamping arm, with two flanged washers and clamping screw GN 708.1
- Type EP: Solid clamping arm, with clasp for welding
Coding
- Coding M: Magnetic piston
Sheet metal parts
Case-hardened steel C10
Zinc plated, blue passivated
Bearing pins hardened
Bearing rivets
Case-hardened
Air cylinder bearing pins
Case-hardened
Double-action air cylinder
Max. pressure 6 bar
All moving parts
Lubricated with special grease
Clamping screw GN 708.1, type A
- Steel, zinc plated, blue passivated
- Rubber thrust pad 85 Shore A
Information
The clamping principle of toggle clamps GN 860 is identical in construction and dimensions to the manually operated vertical toggle clamps GN 810 .
To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar and a compressed air maintenance unit should be installed upstream.
Toggle clamps GN 860 have a permanent magnet integrated into the piston. In conjunction with sensors GN 3380, it is possible to detect the end position, such as for implementing machine controls.
