Zapri
Download
Delovna temperatura
Preglednica podaja splošne napotke za izbiro izdelkov PEB in PES.
Uporaba pri temperaturah med 60 in 100 °C je dopustna, vendar se tehnične lastnosti poslabšajo.
Daljša izpostavljenost najvišji obratovalni temperaturi lahko povzroči znatno poslabšanje mehanskih lastnosti v primerjavi z nazivnimi vrednostmi.
| Delovna temperatura | PEB-80 / PES-80 (modra) | PEB-90 / PES-90 (oranžna) | PEB-92 / PES-92 (rdeča) |
| -40 °C / -20 °C | ▲ | ▲ | ▲ |
| -20 °C / +15 °C | ● | ● | ▲ |
| +15 °C / +60 °C | ● | ● | ● |
| +60 °C / +100 °C | ❒ | ❒ | ❒ |
| > 100 °C | ▲ | ▲ | ▲ |
● Priporočena uporaba; ❒ Dopustna uporaba; ▲ Odsvetovana uporaba
-
Generals
-
1. Plastic materials
- 1.1 Mechanical strength
- 1.2 Thermal resistance
- 1.3 Strength and surface hardness
- 1.4 Resistance to chemical agents
- 1.5 Resistance to atmospheric agents and uv rays
- 1.6 Flame resistance
- 1.7 Electrical properties
- 1.8 Surface finish and cleanability
- 1.9 Compliance with international standards
- 1.10 Competence of elesa+ganter technical department
- 2. Metal materials
- 3. Other materials
- 4. Machining tolerances
- 5. Fixed handles
- 6. Assembly measures
- 7. Special executions
- 8. Colours
- 9. Test values
-
10. Technical tables
- 10.1 Conversion tables
- 10.2 DIN 79 Square holes and shafts
- 10.3 DIN 6885 Keyways
- 10.4 GN 110 and GN 110.1 Transversal holes
- 10.5 DIN 13 ISO Metric threads
- 10.6 DIN 228 Cylindrical GAS-BSP threads
- 10.7 DIN EN ISO 898-1 | DIN EN 20898-2 Strenght values
- 10.8 DIN ISO 286 ISO-Fundamental tolerances
- 10.9 IP Protection Classification
- 10.10.1 PFB | PRB Thread locking with jamming action Polyamide patch coating/ Polyamide complete coating
- 10.10.2 MVK Thread locking gluing Micro encapsulation precote 80 (red)
- 10.11 Stainless Steel characteristics
- 10.12 Surface treatments
- 10.13 Carbon steel, zinc alloys, aluminium, brass characteristics
- 10.14.1 Duroplast, elastomer, technopolymer and rubber characteristics
- 10.14.2 Duroplast, elastomer, technopolymer and rubber characteristics
- 10.14.3 Duroplast, elastomer, technopolymer and rubber characteristics
- 10.15 Load ratings U-Handles
- 10.16 Load ratings metal hinges
- 10.17 Strength of indexing plungers
- 10.18 Assembly sets GN 965 and GN 968
- 11. Vibration-damping elements
-
1. Plastic materials
- Hygienic design
- Ročna kolesa, gonilne ročice
- Upravljalni ročaji
- Krmilni elementi
- Rotary controls
- Zaskočni elementi
- Joints
- Transmission elements
- Levelling elements
- Hinges
- Zapahi
- Toggle, power and hook clamps
- Hidravlični elementi
- Tube clamp connectors
- Castors and wheels
- Magnets
- Komponente za transportne trakove
- Linear slides
- Vibracijski blažilniki
- Vakuumski sestavni deli
- Elastomerne vzmeti